wireless internet connection: Configuration of repeater mode

Congratulations on your purchase of this 802.11g Universal Wireless Repeater.The wireless Repeater extends the range of your access point/wireless router by repeating the signal to wireless clients that are beyond the broadcasting range of the access point/wireless router. This provides the wireless clients with greater flexibility and mobility. Best of all the Wireless Repeater is compatible with existing 802.11b and 802.11g network devices so it will work with most existing wireless devices. This product is specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution for Internet surfing and is easy to configure and operate even for non-technical users. Instructions for installing and configuring this product can be found in article.
In this article i will tray configuration with product of airlink model AP311W. I will explain step by step how to configuration this pruduct for function corectly as repeater mode.

Using setup wizard of repeater configuration

step 1

Verify the Repeater is powered on, insert the provided CD, and wait for the autorun screen to

step 2

click on SETUP

step 3

click Next

and wait for the wizard to detect your access point / wireless router

Step 4
Select the SSID (Network Name) of your access point / wireless router from the Selection list. Click Yes if you see your SSID in the list and you don’t have encryption enabled for your wireless network. Skip to Step 8. Click Yes if you see your SSID and you have encryption enabled. Skip to Step 6. Click Manual if you don’t see your SSID in the list. Continue to Step 5.

Step 5
Enter the SSID (Network Name) of your access point / wireless router in the
SSID field and select the appropriate Channel and Encryption settings and click Next.

Step 6a
Select the same level of WEP encryption (64-Bits / 128-Bits) of your wireless
network from the drop-down menu.

Step 6b
Enter the same WEP key (password) of your wireless network in the Key 1
field and click Next. Skip to Step 8.

WPA-PSK
Step 7a
Enter the same Pre-Shared Key (passphrase) of your wireless network in the
Pre-Shared Key field and click Next

Step 8
the Repeater from the list, verify the Repeater Name is AP311W, and
click Yes.

Step 9
The default password for entering the Repeater’s Web Configuration Utility is
admin. To change the password, enter the new password in the Password field and
click Enter.