Along with it's steps:
1. The reset of Access Point (AP). The reset before that AP it by pressing the reset switch at the back of point access for 10 seconds with paper clip, although we were convinced settingan it back to default.
2. Give IP static to Laptop/Notebook/PC. Laptop/Notebook/PC we the love ip static care of 192,168,1. * (the star could be filled up by any the origin not 245 and under 255).
3. Put Laptop through to AP with the cable UTP if has connected the UTP cable from Laptop/PC this to point access directly.
4. The connection cheque to AP. Cek the quality of the connection to AP by using the Ping order to the address 192,168,1,245, if being reply continued the following step.
5. Be opened web the administrator AP. Open browser then type the address above (192,168,1,245) in address the bar. If going out the box of the dialogue user password fill it “admin” (this was default password AP) to the box password, whereas username let empty. Click OK and you will find the page setting based web from this point access.
If you planned to connect this point access in your network that had the different segment (for example apart from 192,168,1. *) the IP difference static him to the appropriate segment, or also could choose DHCP if you did not want to give IP Statis. But that was last possibly you would the difficulty of finding IP this point access eventually.
In web based control the panel from this point access you could arrange various settingan that was provided by WAP54G, for example Mode, authentication him and in place of password default. After was finished determined IP from WAP54G this pulled out the UTP cable from Laptop/PC, then continuation to your network. Necessarily you already could to access web-based control this panel of point access from your network.
good try.
1. The reset of Access Point (AP). The reset before that AP it by pressing the reset switch at the back of point access for 10 seconds with paper clip, although we were convinced settingan it back to default.
2. Give IP static to Laptop/Notebook/PC. Laptop/Notebook/PC we the love ip static care of 192,168,1. * (the star could be filled up by any the origin not 245 and under 255).
3. Put Laptop through to AP with the cable UTP if has connected the UTP cable from Laptop/PC this to point access directly.
4. The connection cheque to AP. Cek the quality of the connection to AP by using the Ping order to the address 192,168,1,245, if being reply continued the following step.
5. Be opened web the administrator AP. Open browser then type the address above (192,168,1,245) in address the bar. If going out the box of the dialogue user password fill it “admin” (this was default password AP) to the box password, whereas username let empty. Click OK and you will find the page setting based web from this point access.
If you planned to connect this point access in your network that had the different segment (for example apart from 192,168,1. *) the IP difference static him to the appropriate segment, or also could choose DHCP if you did not want to give IP Statis. But that was last possibly you would the difficulty of finding IP this point access eventually.
In web based control the panel from this point access you could arrange various settingan that was provided by WAP54G, for example Mode, authentication him and in place of password default. After was finished determined IP from WAP54G this pulled out the UTP cable from Laptop/PC, then continuation to your network. Necessarily you already could to access web-based control this panel of point access from your network.
good try.