instruction for using the wireless wouter to share the internet with multiple PCs.(power On Wireless Router and Modem)
Step 1.Cabling section :
1. Connect the ethernet cable from the router's WAN Port to The LAN port of modem
2.Connect another Ethernet cable from any LAN port of Router to the ethernet LAN socket on PC
3.Check to make sure the router was connected to pc.
Step 2. PC LAN Ip Configuration
1. Configure LAN Ip of PC, setting to automatically obtain an ip from the router
2. Power on squence for the networking devices and PC
- firstly, power off the modem followed by router and pc
-second, power in the modem
-third power on the router followed by pc for next step
Step 3. Router configuration - PPoE
1. Enter the router default ip address into your browser, and press EnTER
2. The login screen will appear,enter username and password default, in this example default user is "admin" and password is "1234"
3. the main page will appear, click "quick setup"
following example is for "PPoE" WAN setting
4. Select (GMT) Greenwich mean time : (youer country) then click NEXT Button
5. Select PPoE xDSL, the system will move to next step
6. Enter username and password , that ISP Provider and leave the others. ("services name" can be blank) and click "OK" to save the setting then reboot the router
7. After reboot, your router is now ready for the internet connection. and clients can access internet from LAN PORTS of router, or from signal access point of wireless router